91无码视频在线观看-91无码在线观看-91午夜成人影院在线观看-91午夜福利国产在线观看-91午夜福利片人妻无码-91午夜福利影视

First, Scope of application

Nitrogen generators for the pharmaceutical industry are mainly used in the fields of pharmaceutical production, storage, packaging, and packaging.

Usually easily oxidized water needles (penicillin, etc.) and large infusions (such as amino acids, etc.) need to be protected by nitrogen flushing, otherwise the liquid medicine will be easily oxidized during the storage period, that is, it will deteriorate. Generally, before packaging, the method of flushing nitrogen before and after (or single flushing nitrogen) is used to reduce the oxygen concentration in the ampoule or infusion bottle to below 0.5%, and the medicinal solution can be kept for a long time. At present, the equipment purchased by general manufacturers is about 5-20 m3/h, and the purity is 99.99%. The difference between the medicinal nitrogen generator and other nitrogen equipment is that due to the international standard GMP standard in the pharmaceutical industry, the parts in contact with drugs or liquids are made of stainless steel and the requirements for sterilization. The equipment needs to be made of stainless steel, and the nitrogen outlet of the equipment is required. Install a sterilizing filter device. Also because pharmaceutical factories have high overall requirements for equipment, they usually have high-end configurations.

Others include API manufacturing plants, which also require nitrogen protection. The nitrogen use process is more like the nitrogen use method of fine chemical plants. Usually the purity is 99-99.9%, but the dosage is different depending on the scale of the factory, but the dosage is much larger than that of the medicinal nitrogen generator.

Two, How it works

The nitrogen generator uses air as raw material, uses high-quality carbon molecular sieve as adsorbent, uses the principle of pressure swing adsorption (PSA), and uses molecular sieve full of micropores to selectively adsorb air to achieve the purpose of oxygen and nitrogen separation. Oxygen is preferentially adsorbed on molecular sieves under pressure, and nitrogen is obtained from the non-adsorbed phase. A nitrogen-enriched component can thus be obtained in the gas phase. Therefore, using the characteristic of carbon molecular sieve that the adsorption amount of oxygen and nitrogen is different in a certain period of time, the automatic control software performs pressure adsorption according to a specific time program, and the cycle process of atmospheric analysis completes the separation of oxygen and nitrogen, thereby obtaining high purity. of finished nitrogen.

Third, Performance characteristics

1. Process characteristics:

(1) The pressure swing adsorption nitrogen production equipment has the characteristics of wide applicable gas source, high product purity, simple process, high degree of operation automation, low operating cost, etc.

(2) The compressed air purification components have a long service life and are easy to replace and maintain.

(3) The outlet flow rate of the nitrogen making equipment is large, and the outlet pressure can be adjusted within the set range.

(4) It can be started and stopped at any time according to the production situation.

(5) The nitrogen purity of the product is high, and the nitrogen purity >99.99% can be achieved by means of pressure swing adsorption, and there is no need to configure nitrogen purification equipment.

2. Technical design features:

(1) The unique molecular sieve packing technology and compacting device are adopted, which not only avoids the molecular sieve pulverization phenomenon caused by the impact of the molecular sieve in the high-speed flow of the airflow, but also improves the reliability of the long-term operation of the system.

(2) Scientific and reasonable technological process and equipment configuration, the equipment is compact in structure, beautiful in appearance, and occupies a small area.

(3) The equipment operation cost is low, and the nitrogen purity and flow are stable and reliable.

(4) Part of the air pretreatment equipment, each filter has a pressure differential indicator, and an automatic sewage system.

(5) The equipment adopts standard parts to connect and disassemble, which makes installation and maintenance more convenient and convenient.

(6) Imported program-controlled valves with high reliability have long service life and can meet the needs of long-term stable operation of the equipment.

(7) The degree of automation is high. Using the microcomputer automatic program control system developed by our company, the equipment can be operated automatically, and the purity, pressure and flow of nitrogen can be adjusted as required.